|
HITACHI LX20 Wheel Loader |
|  |
| Version TB |
 |
 |
 |
 |
| --- Click photos to enlarge --- |
| COMMENT OPERATORS AREA: Tidy. The seat has 2 x 25mm splits at the base of the backrest and a 100mm split on the L/H side. Instrument panel is tidy and intact. EXTERIOR PANELS: Are in tidy condition. LH front guard has taken a slight knock and pulled away from the frame as has the RH guard. Both the steps are bent backwards but are still functional. There is some light surface rust appearing on some of the panels but nothing serious. FUNCTIONAL EQUIPMENT: Both the loader arms are straight. The crowd ram seal is leaking but this is an easy fix. There is 3mm of play in the L/H lift ram eyelets. All other pins and rams appear okay. Unit fitted with 1500mm wide bucket with a reversible cutting edge. RH side is worn on the cutting edge. MECHANICAL: Engine work dirty - no visible leaks. Cold started well and ran smoothly with clean emission. Moderate wear evident in the steering ram eyelets and heavy wear in the main chassis centre pivot. Overall a very tidy unit that will go straight into service however the chassis pivot will require attention soon. Please note the hour meter shows 780 hours however the vendor informs us that the clock has been replaced and should read 2780 hours. TYRES Matched set of 12.5 x 70-16 Industrial Mudgrips with approx 50% remaining tread all round. |
| TENDER REF | 14941 | ||
| LOCATION | Christchurch | ||
| FLEET NO | 623044 | ||
P.O. Box 98876
Manukau City 2241
New Zealand
Phone: 0064 (0) 9 269 0481 - Fax: 0064 (0) 9 269 0489 - Toll Free: 0800 500 166
Email: alcyone.baker@manheimfowles.co.nz
 |
 |
 |
 |
© Copyright ManheimFowles 2008